Aurora V8-4.0L VIN C (1996)
22. As the ratchet lever moves to its first click, hold the tensioner shoe inward and insert a pin through the hole in the release lever.
23. The locked ratchet mechanism should hold the shoe in a collapsed position.
24. Install the secondary drive chain tensioners.
25. Install the secondary drive chain tensioner retaining bolts.
^
Tighten the secondary drive chain tensioner bolts to 25 Nm (18 ft. lbs.).
^
Tighten the camshaft sprocket bolts to 120 Nm (90 ft. lbs.).
IMPORTANT: Make sure the tensioner release lever faces toward you before tightening.
26. Route the secondary drive chain for the right hand cylinder head over the outer row of the intermediate shaft teeth. Repeat steps 3 through 9 for
right hand camshaft. Right hand camshaft sprockets are identified RI (right intake) and RE (right exhaust). In addition the RE sprocket must
contain the camshaft position sensor pickup.
27. Install the camshaft position sensor.
^
Tighten the camshaft position sensor retaining bolt to 10 Nm (89 inch lbs.).
28. Install the oil pump. Refer to Oil Pump Replacement.
