oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

All Other Service Bulletins for Driver Information Center: > < Driver Information Center - Displays Date Not Available
Page 1
background image

Driver Information Center: Customer Interest
Driver Information Center - Displays Date Not Available

File In Section: 8 - Chassis/Body Electrical 

Bulletin No.: 63-83-02

Date: March, 1996

Subject: 
Driver Information Center (DIC) Reads "Date Not Available" or Displays Dashes (-) (Replace HVAC Programmer)

Models: 
1996 Oldsmobile Aurora - Built Prior to December 8, 1995

Condition

Some owners may comment that the Driver Information Center (DIC) display reads "Date Not Available" on power up if DIC is in date mode. Condition
may occur in both run and ignition power modes. "Date Not Available" remains on DIC display for up to one minute, then proper date is displayed. If
DIC is in Estimated Time of Arrival (ETA) mode, dashes (---) will be displayed instead of numerical date.

Correction

If "Date Not Available" clears after one minute, replace the HVAC programmer with new HVAC programmer, P/N 16218973. Refer to Section 1C of
the Service Manual for HVAC Programmer replacement procedure.

If "Date Not Available" message does not clear, refer to Section 8C of the Service Manual for date setting procedure.

Parts Information

Parts are currently available from GMSPO.

Warranty Information

For vehicles repaired under warranty, use:

Labor Operation

Labor Time

D0780

0.7 hr

All Other Service Bulletins for Driver Information Center: > < Driver Information Center - Displays Date Not Available