Aurora V8-4.0L VIN C (1996)
24.3. Fasten the retaining clips with two 10 mm bolt/screws.
Tighten
Tighten the retaining clip bolt/screws to 6 Nm (53 lb in).
25.
On the rearward side of the front engine frame crossmember, drill one 5 mm (0.2 in) hole using the attached LH retaining clip (6) as a template.
25.1. Position the retaining clip so that the metal part of the hose does not contact the cradle.
25.2. Fasten the retaining clip with a 10 mm bolt/screw.
Tighten
Tighten the retaining clip bolt/screw to 6 Nm (53 lb in).
26.
Secure the power steering outlet hose assembly with the two rosebud clips (5).
27.
Install the LH and RH lower splash shields.
28.
Install the front splash shield.
29.
Install the LH front tire/wheel assembly.
30.
Lower the vehicle.
31.
Fill and bleed the power steering using J 43485.
Refer to Bulletin Number 83-32-09, dated November, 1998.
Parts Information
Part Number
Description
25728474
Power Steering Outlet (Return)
Hose Assembly
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use the table as shown.
DISCLAIMER
