oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

ABOUT US
Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor] > < Diagram Information and Instructions|Page 4482

Aurora V8-4.0L VIN C (1996)

Page 1
background image

Knock Sensor: Service and Repair

Removal Procedure

1. Remove the intake manifold.
2. Disconnect the knock sensor electrical connector.
3. Remove the knock sensor.

Installation Procedure

1. Install the knock sensor. Tighten the knock sensor to 19 Nm(14 lb ft).
2. Connect the knock sensor electrical connector.
3. Reinstall the intake manifold.

Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor] > < Diagram Information and Instructions|Page 4482