Aurora V8-4.0L VIN C (1996)
12.
Install the bolt retaining the fuel rail assembly bracket to the engine lift bracket.
Tighten the fuel rail assembly bracket bolt to 6 Nm (53 lb in).
13.
Connect the fuel injector wiring harness to the 8 fuel injectors and reinstall the fuel injector wiring harness.
14.
Connect the NEW fuel regulator hose to the fuel regulator and the vacuum port on the intake manifold.
15.
Install the PCV rear hose.
16.
Apply dielectric grease, GM P/N 12345579 (Canadian P/N 1974984) to each spark plug boot. Route and connect the front spark plug wires to the
front spark plugs.