Aurora V8-4.0L VIN C (1996)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
IAC Valve And TP Sensor
Removal Procedure
1. Remove the IAC electrical connector.
2. Remove the two IAC valve attaching screws (4).
3. Remove the IAC valve (1).
Installation Procedure
1. Install the new IAC 0-ring.
2. Install the IAC valve and tighten the screws. Tighten the screws to 3 Nm (27 lb in).
3. Connect the IAC valve electrical connector.
