Aurora V8-4.0L VIN C (1996)
Power Steering Pressure Switch: Description and Operation
DESCRIPTION
The power steering pressure switch is located on the power steering pressure hose between the power steering pump and rack and pinion gear. The
power steering pressure switch is normally closed and provides a battery voltage signal to the PCM with no power steering load. When power
steering pressure increases to a calibrated level due to steering load (such as full steering lock), the switch opens and causes the signal voltage to
the PCM to drop to 0 volts.
The PCM uses the power steering pressure switch signal for idle speed control during high steering loads to maintain a stable idle. A shorted
power steering pressure switch may cause a stumble or stall during steering loads and an open switch should set a PCM DTC.
