Bravada V6-262 4.3L VIN W CPI (1994)
^
Tighten clamp screw to 1.7 Nm (15 in. lb.).
4. Engine coolant.
^
Use the coolant drained earlier only if it is uncontaminated. Discard contaminated coolant and add fresh 50/50 coolant and water mixture.
Inspect
^
Be sure the installed hose(s) do not sag or rub against other components. Adjust or support the hose as necessary to correct.
^
Operate the engine and check the hose installation for leaks.
^
Tighten the hose clamp screw a bit at a time, if necessary, to stop a leak.
^
Check the coolant level after the engine has been warmed up and allowed to cool. Add coolant as required.