Bravada V6-262 4.3L VIN Z (1991)
Trunk / Liftgate Lock Cylinder: Customer Interest
Endgate Lock Cylinder Assembly - Rattle
NUMBER:
91-T-243
CORP.REF.NO:
261003
DATE:
August 1992
SECTION:
10-6, 1OA5
SUBJECT
ENDGATE LOCK CYLINDER ASSEMBLY RATTLE - BEND THE LOCK CYLINDER SPRING
MODELS/YEARS
1991 BRAVADA
Some 1991 Bravadas may exhibit a rattling sound emanating from the rear of the vehicle. This condition may occur if the end gate lock cylinder
assembly is loose.
To correct this condition, it is necessary to bend the ends of the spring within the lock cylinder assembly eliminating any clearance between the pawl
assembly and cylinder housing.
SERVICE PROCEDURE:
1.
Open the end gate to the horizontal position and remove the inner trim panel.
2.
Remove the end gate inner panel reinforcement from the end gate (Figure 1, Item 1).