Bravada V6-262 4.3L VIN Z (1991)
Accumulator Insulation Installation:
1.
Install the upper and lower insulators (P/N 1562121 and 15612120)(Figure 4, "3" and "4") on the A/C accumulator assembly.
Important:
The insulator is designed for a G-van and must be modified for use on a Bravada accumulator.
2.
Cut the lower insulator as necessary to fit the accumulator mounting bracket. Cut the upper insulator as necessary to accommodate the A/C pipes
and fittings.
3.
Install the damp (P/N 15530486) (Figure 4, "2") on the insulators at the overlapped portion and tighten the clamp.
Inspection:
1.
Start the engine and check all hose connections for leaks.
2.
Place the climate control lever in the "Max A/C" position and ensure that the water valve is operating properly.
Underbody Shield Installation:
Note:
Installation of this shield will improve engine cooling and assist in directing air flow through the condenser and radiator.
1.
Raise vehicle on a hoist to access the underbody.
