Bravada V6-262 4.3L VIN Z (1991)
6. Clamp (150) and screw (148).
7. Accumulator (4).
IMPORTANT: Drain excess refrigerant into a clean container. Measure and add new oil.
INSTALL OR CONNECT
1. Clamp (150) to the accumulator (4).
2. Accumulator (4) to the evaporator core (143) with screw (140).
3. Inlet line (108) from the evaporator core (143).
IMPORTANT: Add 0.057 kg (2 oz.) of clean refrigerant oil PLUS an amount equal to that drained.
^
Use clean 525 viscosity refrigerant oil on the seals.
^
Tighten connections to 24 Nm (18 ft. lbs.).
4. Electrical connection (154).
5. Negative battery cable.
6. Refrigerant to the system.
^
Evacuate, charge and leak test.