Bravada V6-262 4.3L VIN Z (1991)
2.
Place the shield (P/N 15564769) so that the back edge rests on the front crossmember and the front outer edges rest on the frame rails (Figure 5).
3.
Align the shield attachment holes with the pre-drilled threaded holes on the front crossmember and frame rails.
4.
Torque the six (6) attachment bolts (P/N 11509171) and washers (P/N 15596486) to 38 N-m (8.5 lbs.ft.).
5.
Lower the vehicle on the hoist.
SERVICE PARTS INFORMATION
Part Number
Description
Quantity
14044414
Valve, heater water
1
15612120
Insulator, accumulator lower
1
15612121
Insulator, accumulator upper
1
15530486
Clamp, insulator
1
12337891
Clamp, water hose
8
6272766
Tee, vacuum hose
1
*
Hose, 3/4 inch heater water
as req'd
*
Hose, 5/8 inch heater water
as req'd
*
Hose, vacuum, plastic
as req'd
*
Hose, vacuum, 3/32 inch rubber
as req'd
15564769
Shield
1
11509171
Bolt
6
15596486
Washers
6
*
Part may be obtained locally at most hardware stores. All other parts are currently available from GMSPO.
WARRANTY INFORMATION:
Labor Op.
Description
Labor Time
Trouble Code
T7001
Valve and insulator installation.
0.7 hrs.
92
T7002
Underbody shield installation.
0.3 hrs.
92