Bravada V6-262 4.3L VIN Z (1991)
Important:
Make sure during pedal assembly installation that the insulation mat does not get trapped between the pedal assembly and dash panel. See
the illustration.
Refer to the 1992 Bravada Service Manual, page 6E2-C2-22 & 23 for proper accelerator pedal removal and installation procedures.
2.
Retest the TPS voltage. If voltage readings are still below specified levels, replace the accelerator cable with a redesigned cable (P/N 15693481,
currently available from GMSPO).
Refer to 1992 Bravada Service Manual, page 6E2-C2-22 for proper accelerator cable removal and installation procedures.
