Bravada V6-4.3L VIN W (1997)
Remove or Disconnect
1. Screw that retains the inside door handle bezel to the door trim panel.
2. Inside door handle bezel from the door trim panel by prying at rear of the bezel with the door lock knob in locked place.
Install or Connect
1. Inside door handle bezel to the door trim panel.
A. Route the inside door handle and lock rod through the appropriate openings in the bezel.
B. Align the lock rod to the door lock knob.
C. Position the bezel and snap it into place.
2. Screw that retains the inside door handle bezel to the door trim panel.
Tighten
^
Screw to 1.9 Nm (17 lb. in.).
Lock Cylinder
Door Lock Cylinder & Outside Door Handle Lock Rods
Front Door Lock Cylinder & Outside Handle
New lock cylinders are available as replacement parts. If lock cylinders require replacement for any reason, apply a coating of lubricant GM P/N
12345120, or equivalent, inside of the lock case and cylinder keyway prior to assembling and installing the cylinder
To repair a binding lock cylinder, refer to "Binding Lock Cylinders". Code the new lock cylinder, if necessary.
Remove or Disconnect
1. Outside door handle.
2. Door lock cylinder from the outside door handle.
