oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Body - Squeeze Type Resistance Spot Welding/Equipment|Page 11386 > < Body - Squeeze Type Resistance Spot Welding/Equipment|Page 11384
Page 1
background image

Frame: Technical Service Bulletins
Body -  Rear Roof Perforation

Rear Roof Perforation (Install New Rear Roof Section) #01-08-66-011C - (Jul 18, 2002)

Rear Roof Perforation (Install New Rear Roof Section)

1995-2001 Chevrolet Blazer

1995-2001 GMC Jimmy

1996-2001 Oldsmobile Bravada

This bulletin is being revised to add Warranty information. Please discard Corporate Bulletin Number 01-66-011B (Section 08 -- Body and Accessories).

Important: Implementation of this Service Bulletin by "GM of Canada" dealers requires prior District Service Manager approval.

Condition

Some customers may comment that the rear portion of the roof has some rust forming. This condition mainly happens in coastal states.

Cause

During production, the E-coating may have missed that portion of the roof.

Correction

Replace the rear roof section following the procedure listed below.

1. Remove the following components depending on the model (See Illustration):

-

Luggage rack

-

Third brake light

-

Left and right interior quarter panel trim

-

Headliner

-

Rear lift gate primary seal

-

Lift gate or lift glass

Body - Squeeze Type Resistance Spot Welding/Equipment|Page 11386 > < Body - Squeeze Type Resistance Spot Welding/Equipment|Page 11384