Bravada V6-4.3L VIN W (1997)
10. Immerse the opposite end of the hose into a container partially filled with clean brake fluid.
11. Slowly open bleeder valve at least 3/4 of a turn and allow the fluid to flow until no air is seen in the fluid.
12. Tighten the bleeder valve to 7 Nm (62 inch lbs.).
13. Repeat Steps 9 through 12 at all the wheels
14. Check the brake pedal for "sponginess." Repeat the bleeding procedure if this condition is found.
15. Remove J 39177.
16. Disconnect the hose from the bleeder adapter.
17. Remove the bleeder adapter.
18. Fill the master cylinder to the proper level.