Bravada V6-4.3L VIN W (1997)
Headlamp Switch: Service and Repair
Description
Remove or Disconnect
^
Make sure the headlamp switch is in the OFF position.
^
Make sure the ignition switch is in the LOCK position.
1. Instrument panel accessory trim plate.
2. Electrical connector.
3. Screws that retain the headlamp switch panel to the instrument panel accessory trim plate.
4. Headlamp switch panel from the instrument panel accessory trim plate.
5. Headlamp switch from the headlamp switch panel.
Install or Connect
1. Headlamp switch to the headlamp switch panel.
2. Headlamp switch panel to the instrument panel accessory trim plate.
3. Screws that retain the headlamp switch panel to the instrument cluster bezel.
Tighten
^
Screws to 1 N.m (9 lb in).
4. Electrical connector.
5. Instrument panel accessory trim plate.