Bravada V6-4.3L VIN W (1997)
Ignition Coil: Service and Repair
Ignition Coil Removal
REMOVAL PROCEDURE
Ignition Coil: Removal Procedure
1. Turn OFF the ignition switch.
2. Disconnect the wiring connectors from both sides of the ignition coil assembly.
3. Disconnect the ignition coil high tension wire to the distributor.
Ignition Coil: Removal Procedure
4. Remove the two nuts holding the ignition coil assembly bracket to the engine inlet manifold.
5. Remove the ignition coil bracket and coil assembly.
6. Drill and punch out the two rivets holding the ignition coil assembly to the bracket.
7. Remove the ignition coil assembly from the bracket.
INSTALLATION PROCEDURE
