Bravada V6-4.3L VIN W (1997)
Notice
DO NOT use a pneumatic impact gun when installing the new bolt in the next step. Install the new bolt using only hand tools and a torque
wrench.
11.
Position the seat belt buckle to the floor pan and install a new bolt.
Tighten Tighten to 70 Nm (52 lb ft).
12.
Connect the electrical connector and position the connector back under the console.
13.
Close the carpet flap over the bolt head.
14.
Return the seat to the original position.
15.
While sitting in the driver's seat, connect the seat belt buckle latch plate to the seat belt buckle.
16.
Turn the ignition switch to the ON position and verify that the seat belt buckle indicator light goes out.
17.
Turn the ignition switch to the OFF position.
18.
Install the GM Recall Identification Label.