Bravada V6-4.3L VIN W (1997)
a. Place pulley on the end of the pump shaft.
b. Install J 25033-B. Make sure the pilot bolt bottoms in the shaft by turning the nut to the top of the pilot bolt.
c. Hold the pilot bolt.
d. Turn the nut clockwise.
e. Install pulley flush +/- 0.25 mm (0.010 inch) with the end of the power steering pump shaft.
7. Belt. Refer to Engine.
8. Load the tensioner assembly. Refer to Engine.
9. Hoses.
10. Fill and bleed the system. Refer to "Bleeding The Power Steering System."
INSPECT
-
Hoses for clearance.
