Bravada V6-4.3L VIN W (1997)
9. Bushing.
INSTALL OR CONNECT
1. Bushing.
2. Bushing.
3. Lower control arm to the crossmember and the frame bracket. Install the front leg of the lower control arm into the crossmember before installing
the rear leg into the frame bracket.
4. Bolts in the direction shown.
5. Nuts.
-
Tighten nuts to 110 Nm (81 ft. lbs.).
-
Tightening nuts with the lower control arm at "Z" trim height.
-
Tighten nuts with front suspension loaded.
6. Ball joint stud into the steering knuckle.
7. Stud nut and new cotter pin.
-
Tighten stud nut to 108 Nm (79 ft. lbs.).
8. Shock absorber. Refer to "Shock Absorber Replacement."
9. Nut.
