Bravada V6-4.3L VIN W (1997)
Torsion Bar: Service and Repair
REMOVE OR DISCONNECT
^
Tool Required:
-
J 36202 Torsion Bar Unloading/Loading Tool
Raise the vehicle and support it with safety stands.
1. Transmission shield.
2. Both torsion bars using J 36202.
-
To aid in assembly, record the number of turns the tool makes when removing the adjusting bolt and then remove J 36202.
3. Lower link mount nut from one side.
4. Torsion bars.
-
Note the exact direction of the forward end and side of the torsion bar that is being removed.
5. Lower link mount nut from the opposite side.