Bravada V6-4.3L VIN W (1997)
Important Support the caliper with a piece of wire to prevent damage to the brake hose.
5. Hub and bearing assembly from axle joint splined shaft using J 28733-B.
6. Rotor. Refer to "Rotor Replacement." Refer to Brakes and Traction Control.
7. Bolts.
Important Lay the hub and bearing assembly on the hub bolt (outboard) side. This will prevent damage or contamination of the bearing seal.
8. Splash shield.
9. Cotter pin.
10. Nut.
11. Tie rod end from the knuckle using J 24319-B.
12. Cotter pins.
