Bravada V6-4.3L VIN W (1997)
Part 2 Of 2
REMOVE OR DISCONNECT
^
Tools Required:
-
J 8614-01 Pinion Flange Remover
Important: It is essential that the positions of all driveline components relative to the propeller shaft and axles be observed and accurately reference
marked prior to disassembly. These components include the propeller shafts, drive axles, pinion flanges, output shafts, etc. All components must be
reassembled in the exact relationship to each other as they were when removed. Additionally, the published specifications and torque values, as well as
any measurements made prior to disassembly must be followed.
1. Front under body shields, if equipped.
2. Left front under body shield bracket.
3. Bolts and retainers from the pinion flange.
-
Accurately mark the front propeller shaft and pinion flange.
4. Front propeller shaft from the pinion flange.
5. Front propeller shaft.
-
Mark the pinion flange, pinion shaft and the nut before disassembly so that the same preload torque can be maintained upon assembly.
6. Pinion flange nut and washer.
-
Use J 8614-01 to hold the pinion flange.
