Bravada V6-4.3L VIN W (1997)
Install or Connect
1. Controller (18) on wiper motor (20).
2. Wiper motor harness (21) to controller (18).
3. Wiper motor (20) on vehicle with two screws (19) while keeping shaft (C) centered in tailgate hole.
Tighten
^
Two screws (19) to 6.5 N.m (57 lb. in.).
4. Electrical connector (17) to controller (18).
5. Negative battery cable.
6. Interior panel to vehicle endgate.
7. Spacer (15) and nut (14) to vehicle.
Tighten
^
Tighten nut (14) to 6 N.m (53 lb. in.).
8. Wiper arm assembly (8) to vehicle.