Bravada V6-4.3L VIN W (1997)
Description
Description
Install or Connect
1. Transmission assembly to the vehicle.
2. Transmission screws.
Tighten
^
Wiper transmission assembly mounting screws to 14 N.m (10 lbs. ft.).
Description
3. Transmission drive link to wiper motor crank arm using J 39529.
^
Lubricate the inside of the socket with white lithium grease (GM P/N 9985885) or equivalent.
IMPORTANT: Wiper transmission assembly must be assembled to the crank arm past the second detent so the seal is compressed to a maximum
height of 25 mm (1 inch).
4. Cowl vent grille.
5. Wiper arm assemblies.
Inspect
^
Perform System Check.
