Bravada 2WD L6-4.2L VIN S (2002)
4.
Inspect the harness at the pinched location (2) and repair any damaged wires. Refer to Wiring Repairs in the Wiring Systems sub-section of the
Service Manual.
5.
Verify proper installation of the harness clip (1) that attaches the harness to the body. Reinstall if necessary.
6.
Install the carpet back into place.
7.
Install the right rear door sill plate.
8.
Install the right rear seat back. Refer to the Seats sub-section of the Service Manual for the Seat Back Replacement procedure (SI2000 Document
ID # 741140).
Parts Information
Parts are expected to be available from GMSPO October 15, 2001.
Warranty Information
For vehicles repaired under warranty, use the table.
