Bravada 2WD L6-4.2L VIN S (2002)
Trunk / Liftgate Handle: Service and Repair
HANDLE/STRIKER REPLACEMENT - LIFT GATE WINDOW
REMOVAL PROCEDURE
1. Open the lift gate window.
2. Remove the nuts retaining the striker assembly to the lift gate window.
3. Remove the handle and striker assembly from the lift gate window.
INSTALLATION PROCEDURE
1. Install the handle and striker assembly to the lift gate window.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the nuts retaining the striker assembly to the lift gate window.
Tighten
Tighten the nuts to 6 N.m (53 in lb).
3. Check the lift gate window for proper operation, adjust if necessary. Refer to Striker Adjustment - Lift Gate Window.
