Bravada 2WD L6-4.2L VIN S (2002)
Trunk / Liftgate Striker: Adjustments
ADJUSTMENT PROCEDURE
1. Check the lift gate window for proper fit to the lift gate window weatherstrip.
^
Open and close the lift gate window.
^
If the lift gate window is hard to close, additional striker shims will need to be added.
^
If the lift gate window does not seal tightly against the weatherstrip, striker shims will need to be removed.
2. Open the lift gate window.
3. Loosen the nuts retaining the lift gate striker to the lift gate window.
4. Remove or add shims as determined above.
NOTE: Refer to Fastener Notice in Service Precautions.
5. Tighten
Tighten the nuts to 6 N.m (53 lb in).
6. Check the lift gate window for proper fit, readjust if necessary.
7. Close the lift gate window.
