Bravada 2WD L6-4.2L VIN S (2002)
1. Install the transmission support to the frame.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the upper transmission support to the frame mounting bolts.
Tighten the upper transmission support to the frame mounting bolts to 50 N.m (37 lb ft).
3. Install the lower transmission support to the frame mounting bolts.
Tighten the bolts to 46 N.m (35 lb ft).
4. Lower the transmission onto the transmission support.
5. Install the transmission mount to the transmission support retaining nuts.
Tighten the transmission mount to the transmission support retaining nuts to 46 N.m (35 lb ft).
6. Install the evaporative emission (EVAP) canister.
7. Install the fuel tank shield.
8. Lower the vehicle.
