Bravada 2WD L6-4.2L VIN S (2002)
Skid Plate: Service and Repair
Radiator Support Shield Replacement
Radiator Support Shield Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the radiator support shield mounting nuts and bolts.
3. Remove the radiator support shield.
Installation Procedure
1. Remove the radiator support shield.
Notice: Refer to Fastener Notice in Service Precautions.
2. Remove the radiator support shield mounting nuts and bolts.
Tighten the radiator support shield mounting nuts to 16.5 N.m (12 lb ft).
3. Lower the vehicle.