Bravada 2WD L6-4.2L VIN S (2002)
Scuff Plate: Procedures
Door Sill Plate Replacement - Front
REMOVAL PROCEDURE
1. If removing the right sill plate, remove the right insulator panel.
2. Starting at the rear of the sill plate, use a flat-bladed tool in order to release the 5 retaining tabs.
3. If removing the left sill plate, remove the sill plate from the hood release handle.
4. Remove the sill plate from the door frame.
5. Remove any retaining tabs that remain attached to the door frame.
INSTALLATION PROCEDURE
1. Ensure that all 5 retaining tabs are securely attached to the sill plate.
2. If installing the left sill plate, position the hood release handle through the sill plate.
3. Align the retaining tabs to the door frame slots.
4. Starting at the front of the sill plate, push down on the sill plate, seating the retaining tabs to the door frame.
5. If installing the right sill plate, install the right insulator panel.
Trailblazer, Envoy, and Bravada
REMOVAL PROCEDURE
