Bravada 2WD L6-4.2L VIN S (2002)
Sun Visor: Procedures
SUNSHADE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the windshield garnish molding.
2. Release the front assist handle from the headliner. Refer to Assist Handle Replacement.
3. Recline the bucket seat and release the upper portion of the center pillar trim panel. Refer to Garnish Molding Replacement - Center Pillar.
4. Open and rotate the sunshade parallel to the side window.
5. Insert a small tool into the bezel access hole (1).
IMPORTANT: Midway through the rotation cycle, the tool will move further into the access hole.
6. Gently push upward on the tool while rotating the sunshade parallel to the windshield. The sunshade bezel should appear to be recessed.
IMPORTANT: Ensure the bezel is recessed before removing the sunshade from the headliner.
7. In order to remove the sunshade from the roof panel, carefully grab the headliner at the windshield pillar and apply downward pressure while
gently rocking the sunshade.
8. Remove the inboard retainer screw.
9. Remove the inboard retainer (1) from the headliner.