Bravada 2WD L6-4.2L VIN S (2002)
5. Pull the seat back cover down approximately 18 cm (7 in) from the top of the seat back, leaving the reinforcement bar exposed.
6. Install the hog rings that retain the seat back pad to the reinforcement bar.
7. Pull the seat cover over the seat back pad.
8. Press the seat cover hook and loop retaining strips together by firmly running your hand over the seat back cover.
NOTE: Refer to Fastener Notice in Service Precautions.
9. Install the seat belt bezel to the top of the seat back with the mounting screw.
Tighten
Tighten the seat belt bezel screw to 3 N.m (26 lb in).