Bravada 2WD L6-4.2L VIN S (2002)
9. Using a flat-bladed tool, carefully disengage the plastic strips that retain the seat back cover to the side airbag inflator module cover.
10. Carefully remove the seat back cover from behind the trim edge of the side airbag inflator module.
11. Compress the seat back pad in order to relieve the pressure against the seat cover.
12. Using a side to side motion, carefully lift off the seat back cover, partially separating the seat back cover from the foam pad.
IMPORTANT: When separating the seat cover hook and loop retaining strips, do not pull the adhesive-backed strip from the pad.
13. Release the lower Velcro retaining strips located inside the seat cover.
14. Remove the 3 hog rings that retain the seat back pad to the reinforcement bar located at the top of the seat back.
