Bravada 2WD L6-4.2L VIN S (2002)
Seat Latch: Service and Repair
Seat Back Latch Bracket - Rear
REMOVAL PROCEDURE
1. Remove the seat back from the vehicle.
2. Remove the bolts (2) that retain the latch bracket to the seat hinge.
3. Remove the latch bracket from the seat hinge.
INSTALLATION PROCEDURE
1. Position the latch bracket to the seat hinge.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the latch bracket bolts (2) that retain the latch bracket to the seat hinge.
Tighten
Tighten the latch bracket bolts to 35 N.m (26 lb ft).
3. Install the seat back to the vehicle.
