Bravada 2WD L6-4.2L VIN S (2002)
Power Seat Switch: Procedures
Lumbar Switch Replacement - Front
REMOVAL PROCEDURE
1. Remove the switch bezel assembly from the seat.
2. Remove the power seat switch.
3. Release the tabs that retain the lumbar switch to the switch bezel assembly.
4. Disconnect the electrical connector from the lumbar switch.
5. Remove the lumbar switch from the switch bezel assembly.
INSTALLATION PROCEDURE
1. Connect the electrical connector to the lumbar switch.
2. Install the lumbar switch to the switch bezel assembly, verifying that the retaining tabs are fully seated.
3. Install the power seat switch.
4. Install the switch bezel assembly to the seat.
Memory Seat Switch Replacement
REMOVAL PROCEDURE
