Bravada 2WD L6-4.2L VIN S (2002)
1. Remove the rear door sill plate.
2. Remove the weatherstrip from the pinch-weld flange.
INSTALLATION PROCEDURE
1. Align the weatherstrip to the door opening with the 2 dots positioned on the upper right and left side.
2. Align the weatherstrip to the door opening with the bond joint positioned at the lower center of the door opening.
3. Install the weatherstrip to the pinch-weld flange. Ensure that the weatherstrip is fully seated.
4. Install the rear door sill plate.
Weatherstrip Replacement - Rear Door Opening
Weatherstrip Replacement - Rear Door Opening
Removal Procedure
1. Remove the rear door sill plate.
