Bravada 2WD L6-4.2L VIN S (2002)
Removal Procedure
Caution: Refer to Brake Dust Caution in Service Precautions
Caution: Refer to Brake Fluid Irritant Caution in Service Precautions
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Remove the rear brake hose bolt from the rear brake caliper.
4. Plug the opening of the brake hose in order to prevent excessive brake fluid loss and contamination.
Important: Discard the metal (copper) gaskets. DO NOT reuse metal (copper) gaskets, replace them.
5. Remove the metal (copper) gaskets from the brake hose bolt.
6. Remove the rear brake caliper mounting bolts.
