Bravada 2WD L6-4.2L VIN S (2002)
1. Install the park brake lever assembly to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the right front park brake lever retaining nut.
^
Tighten the park brake lever mounting nut to 25 Nm (18 ft. lbs.).
3. Connect the electrical connector to the park brake warning lamp switch.
4. Raise the vehicle.
5. Connect the park brake cables to the equalizer.
6. Lower the vehicle.
7. Install the floor console.
8. Enable the park brake automatic adjuster.