Bravada 2WD L6-4.2L VIN S (2002)
2. Install the heater inlet hose to the inlet hose fitting at the engine block.
3. Install the nut retaining the coolant bypass valve to the cowl.
Tighten
Tighten the nut to 10 N.m (89 lb in).
4. Install the inlet heater hose to the engine block.
5. Reposition the inlet heater hose clamp at the engine block using J 38185.
6. Install the quick connect end of the inlet heater corn hose to the heater core.
7. Install the coolant recovery reservoir.
8. Fill the engine cooling system. Refer to Draining and Filling Cooling System in Cooling System.
