Bravada 2WD L6-4.2L VIN S (2002)
Document ID # 162420).
8.
Install an anti-abrasion sleeve, P/N 15166433, around both harnesses in the contact area and install a tie-strap, P/N 12337820 or equivalent,
around the anti-abrasion sleeve as shown.
9.
Position the trim panel to the IP.
10.
Seat the clips that retain the trim panel to the IP.
11.
Install the four trim panel retaining screws.
Tighten
Tighten the screws to 2.5 Nm (22 lb in).
12.
Position the insulator panel to the IP.
13.
Install the two screws that retain the insulator panel to the IP.
Tighten
Tighten the screws to 2.5 Nm (22 lb in).
Parts Information
Parts are expected to be available 1-18-2002 from GMSPO.
Warranty Information
For vehicles repaired under warranty, use the table as shown.
