Bravada 2WD L6-4.2L VIN S (2002)
1. Install the high mount stoplamp to the lift gate window reveal molding, ensuring the center retaining tab is fully seated.
NOTE: Refer to Fastener Notice in Service Precautions,
2. Install the 2 screws that retain the high mount stoplamp to the lift gate window reveal molding.
Tighten
Tighten the 2 retaining screws to 2.5 N.m (22 lb in).
3. Close the liftgate window.
4. Open the liftgate.
5. Install the grommet (1) to the body.
6. Connect the high mount stoplamp electrical connector (2).
7. Attach the rear portion of the headliner to the roof panel, by seating the 2 headliner retaining pins.
8. Position the lift gate opening weatherstrip over the headliner.
