Bravada 2WD L6-4.2L VIN S (2002)
4. Install the power steering hose assembly to front crossmember bracket mounting bolt.
Tighten the power steering hose assembly to front crossmember bracket mounting bolt to 10 Nm (7 ft. lbs.).
5. Install the power steering hose assembly to frame brackets retaining bolts.
Tighten the power steering hose assembly to frame brackets retaining bolts to 10 Nm (7 ft. lbs.).
6. Connect the power steering hose assembly bracket to the wheel well.
7. Install the power steering hose assembly bracket retaining bolt at the wheel well.
Tighten the power steering hose assembly bracket retaining bolt at the wheel well to 10 Nm (7 ft. lbs.).
8. Install the fuse block.
9. Install the battery tray.
10. Connect the fuse block harnesses to the wiring loops.
11. Raise the vehicle. Refer to Vehicle Lifting.
12. Install the power steering return hose and the power steering cooler hose to the power steering cooler.
13. Remove the power steering gear oil seals from the power steering gear using J44586.
Notice: Clean the power steering gear inlet and outlet ports thoroughly of any debris. Failure to do so could result in contamination and damage to the
power steering system components.
14. Clean the power steering gear inlet and outlet ports of any debris.
15. Install the power steering gear oil seals to the power steering gear using J44586.
