Bravada 2WD L6-4.2L VIN S (2002)
Wheel Bearing: Service and Repair
Front Wheel Hub, Bearing, and Seal Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the brake rotor.
4. Remove the ABS sensor mounting bolt from the wheel hub and bearing.
5. Remove the ABS sensor from the wheel hub and bearing.
6. Remove the wheel hub and bearing to the steering knuckle mounting bolts.
7. Remove the wheel hub and bearing from the steering knuckle.
8. Remove the splash shield from the steering knuckle.