Bravada 2WD L6-4.2L VIN S (2002)
Camshaft Position Sensor: Description and Operation
The camshaft position (CMP) sensor is triggered by a notched reluctor wheel built into the exhaust camshaft sprocket. The CMP sensor provides six
signal pulses every camshaft revolution. Each notch, or feature of the reluctor wheel is of a different size for individual cylinder identification. This
means the CMP and CKP signals are pulse width encoded to enable the PCM to constantly monitor their relationship. This relationship is used to
determine camshaft actuator position and control its phasing at the correct value. The PCM also uses this signal to identify the compression stroke of
each cylinder, and for sequential fuel injection. The CMP sensor is connected to the PCM by a 12-volt, low reference, and signal circuit.
