Bravada 2WD L6-4.2L VIN S (2002)
Fuel Injector Balance Test With Special Tool - Steps 6-8
The numbers below refer to the step numbers on the diagnostic table.
3. The engine coolant temperature (ECT) must be below the operating temperature in order to avoid irregular fuel pressure readings due to hot soak
fuel boiling.
6. If the pressure drop value for each fuel injector is within 10 kPa (1.5 psi) of the average pressure drop value, the fuel injectors are flowing
properly. Calculate the pressure drop value for each fuel injector by subtracting the second pressure reading from the first pressure reading. Refer
to the Injector Balance Test Example. See: Computers and Control Systems/Testing and Inspection/Component Tests and General Diagnostics
