Bravada 2WD L6-4.2L VIN S (2002)
Fuel Line Coupler: Service and Repair
Quick Connect Fitting(S) Service (Plastic Collar)
REMOVAL PROCEDURE
1. Relieve the fuel system pressure before servicing any fuel system connection. Refer to the Fuel Pressure Relief Procedure.
CAUTION: Wear safety glasses when using compressed air in order to prevent eye Injury.
2. Using compressed air, blow any dirt out of the quick-connect fining.
3. Squeeze the plastic retainer release tabs.
4. Pull the connection apart.
INSTALLATION PROCEDURE
CAUTION: In order to reduce the risk of fire and personal injury, before connecting fuel pipe fittings, always apply a few drops of clean
engine oil to the male pipe ends.
This will ensure proper reconnection and prevent a possible fuel leak.
During normal operation, the O-ring located in the female connector will swell and may prevent proper reconnection if not lubricated.