Bravada 2WD L6-4.2L VIN S (2002)
6. Install the fuel return pipe retainer.
Tighten
Tighten the return pipe retainer screw to 8 N.m (71 lb in).
7. Connect the fuel return pipe.
8. Connect the fuel pressure regulator vacuum line.
9. Connect the negative battery cable.
10. Inspect for leaks.
10.1. Turn ON the ignition for 2 seconds.
10.2. Turn OFF the ignition for 10 seconds.
10.3. Turn ON the ignition.
10.4. Inspect for fuel leaks.
11. Install the engine wiring harness into the retaining clips at the front of the engine.
12. Install the air intake resonator.
