Bravada 2WD L6-4.2L VIN S (2002)
2. Turn the ignition switch to the ON position.
3. Turn the Tech 2 ON by pressing the power button.
4. Verify that the Tech 2 has been updated with software version 8.0 or newer by reviewing the information on the bottom of the screen.
5. If the Tech 2 has the correct software, press the enter button. If the Tech 2 does not have the correct software, update the Tech 2 software.
6. Select "Diagnostics" on the "Main Menu" screen.
7. Select the "2002" model year.
8. Select "LD Trk, MPV, Incomplete."
9. Select "Body" on the "System Selection Menu" screen.
10. Select the letter "S" (for two wheel drive vehicle) or "T" (for four wheel drive vehicle) on the "Vehicle Identification Product Line" screen.
11. Select the appropriate vehicle name plate (Bravada, Envoy, Envoy XL, TrailBlazer, TrailBlazer EXT).
12. Select the HVAC type.
13. Select "Instrument Panel Cluster."
14. Select "ID Information" (F4).
15. Select "Module Information 2" (F1).
16. Review the IPC software part number displayed on the Tech 2.
17. Press the "Exit" button on the Tech 2 as necessary until the "Main Menu" is displayed.
18. Select "Service Programming System."
19. Follow the on-screen instructions on the Tech 2 and in TIS 2000 for reprogramming the IPC.
20. After reprogramming is complete, turn the ignition switch to the OFF position and disconnect the Tech 2.
21. Turn the ignition switch to the ON position and verify proper IPC operation.
22. Install the GM Identification Label.
Identification Label - For US and IPC
Place a Recall Identification Label on each vehicle corrected in accordance with the instructions outlined in this Product Recall Bulletin. Each label
provides a space to include the recall number and the five (5) digit dealer code of the dealer performing the recall service. This information may be
inserted with a typewriter or a ball point pen.
Put the Recall Identification Label on a clean and dry surface of the radiator core support in an area that will be visible to people servicing the vehicle.
When installing the Recall Identification Label, be sure to pull the tab to allow the adhesion of the clear protective covering. Additional Recall
Identification Labels for US dealers can be obtained from Dealer Support Materials by either ordering on the web from DWD Store. Ask for Item
Number S-1015 when ordering.
Additional Recall Identification Labels for IPC dealers can be obtained from your Regional Marketing Office.
Identification Label - For Canada
Place a Program Identification Label on each vehicle corrected in accordance with the instructions outlined in this Product Program Bulletin. Each label
provides a space to include the program number and the five (5) digit dealer code of the dealer performing the program service. This information may be
inserted with a typewriter or a ball point pen.
Put the Program Identification Label on a clean and dry surface of the radiator core support in an area that will be visible to people servicing the vehicle.
Additional Program Identification Labels for Canadian dealers can be obtained from DGN. Ask for Item Number GMP91 when ordering.
Courtesy Transportation
